iQguard Car Park Gas Detection Sensor

iQGuard carpark gas detection sensor

Ampcontrol's iQguard carpark gas detectors are affordable, solid and robust devices designed for monitoring the level of toxic gases found in enclosed carpark and loading dock environments.

The iQguard carpark sensors are small light weight devices and easy to maintain and servcie. Operation is simple, and they are IP54 rated.

Used in conjunction with a controller, the iQguard carpark sensors run with variable speed drives on exhaust fans to reduce excess power usage.

  

 

Features
Specifications
Sensors
Housing Options
 

  • CO [Carbon Monoxide] and NO2 [Notrogen Dioxide] sensing
  • 2 wire loop
  • Simple installation
  • Simple maintenance
  • Easy to use
  • Simple operation, simply switch on the unit is ready for use
  • Detector is fully temperature compensated for zero and span
  • Unit requires around 30 minutes from switch-on to achieve stated accuracies
  • Standard Detectable Gases / Standard Ranges
          » 0 - 150ppm [CO]
          

 

 Performance Specification 
 Detection method Electrochemical
 Sampling method Continuous diffusion 
 Gas types
Carbon Monoxide [CO]: 0 - 150ppm
Nitrogen Dioxide [NO2]: 0 - 10ppm
 Accuracy ±5.0% of full scale*
 Response time <30 seconds to 90% of step change input 
 Output signal 4 - 20mA 800 Ohms max loop res. at 24VDC 
 Environment Designed to IP54 
 Temperature range -10º to + 45ºC **
 Humidity range 15% to 95% RH non-condensing 
 Operating pressure range 90 to 110kPa 
 Operating voltage 9 - 28 VDC 
 Operating power 96mW to 480mW at 24V 
 Connections 2 - wire loop powered 
 Weight approx 250 grams 
  * Across the temperature range 10ºC to 30ºC, atmospheric pressure 1013mbar, 50% RH
** Do not exceed 45ºC

  • Carbon Monoxide
  • Oxygen
  • Hydrogen Sulphide
  • Nitrogen Dioxide
  • Nitric Oxide
  • Ammonia
  • Chlorine
  • Ethylene Oxide
  • Hydrogen
  • Bromine

iQguard housing options

iQguard housing options