• Input to Output Isolation 1kV.
• High Accuracy 0.1%.
• Reverse Polarity Protected.
• Compact DIN Rail Mount Enclosure.
• Available With 1, 2 or 4 Transmitters per Enclosure.
• Easy to Install.
• Low Cost.

Dual Output Signal Isolators:

Use the XI-L@ dual channel model. Wire the 4-20mA input in series through both inputs on the transmitter, and the two outputs are totally isolated. The outputs are loop powered so you need a seperate 24Vdc power supply for each channel.

 Universal Input - Single Transmitter

Standard Hook-up for XI-L Isolator

• No Power Supply Needed - Input Powers Transmitter.
• Ideal for isolating a typical 4~20mA loop.
• Also good for Line Filtering at the receive end of Line.
• Input to Output Isolation 1kV.
• High Accuracy.
• Reverse Polarity Protected.
• Compact DIN Rail Mount Enclosure.
• Available With 1, 2 or 4 Transmitters per Enclosure.
• Easy to Install.
• Low Cost.

Universal Input - Single Isolator

IMPORTANT NOTE: Disconnecting the output circuit on the XI-P will cause loss of the input signal. This is common to all Input Powered Transmitters. 

Standard Hook-up for XI-P Isolator