Ampcontrol's 12 Channel System Controller is a compact unit designed to accept any sensor or transmitter that gives a 4-20mA output with relay outputs on board for alarm events and programmed response.
The 12 Channel Controller accepts inputs from any two or three wire sensor/transmitter combination that gives a 4-20mA output. Typical sensor/transmitter combinations include Ampcontrol detectors for combustible gas, oxygen, toxic gas, flame as well as temperature and humidty transmitters.
The controller has twelve 4-20mA inputs, two 4-20mA outputs and four relay outputs for common Warn, Alarm, High Alarm and Fault conditions. Three push buttons, four LEDs and a sounder provide status and control functions.
A two-line alpha-numeric display provides continuous status readouts of each monitored channel, with a choice of two user-configurable formats. A specific display mode shows all input readings and status simultaneously.
Indicate status of: Audible Alarm for:
Input Channels
12
Outputs
Two Zone 0-20mA or 4-20mA source outputs into 600 Ohms [max]
Two Warn Relays and Two Alarm Relays, SPDT, 7A, 240Vac/30Vdc
From four to Twelve, 4-20mA source outputs into 600 Ohms [max]
Liquid Crystal Display
Backlit alphanumeric display indicates:
Light Emitting Diodes:
Electronic Buzzer:
The Micro 4000 from AmpControl will accept inputs from any sensor/transmitter combination that will give a 4-20mA output. This versatile unit will also accept inputs directly from AmpControl's range of oxygen and combustible sensors along with two wire contact input devices.
The iQguard series of gas detectors provide high performance solution for a wide variety of industrial gas detection applications. By applying our wealth of experience and innovation in gas detector design, we have created a new generation of products serving environmental monitoring applications.
