Calibrators

Additel ADT761-LA/MA/HA Automated Pressure Calibrators

Additel ADT761 Pressure Calibrator

Fully automated pressure calibrator with built-in pressure generator / controller to as high as 600psi (40bar) or 615psi.a (41 bar.a)
0.02%FS accuracy
Dual pressure modules
Built-in filter and liquid trap with venting system prevents contamination of the calibrator
Portable (12.4 lb)

With a built-in high performance electronic pump and precision pressure controller, Additel's 761 series portable automated pressure calibrators provide a turn-key solution for calibration of gauges, transmitters, and switches both in the field and in the laboratory. In a portable package, this calibrator can automatically generate pressures from 90% vacuum to 600 psi (40 bar) with 0.005% FS pressure control stability and 0.02% FS accuracy. To improve the calibrator accuracy, two pressure modules with differing ranges are built-in and integrated with the internal pump and controller.

With optional external pressure modules (160 series), the 761 can measure pressures up to 10,000 psi (700 bar) with 0.025%FS accuracy. In addition to the pressure generation, control, and measurement capabilities, the 761 also features HART communication capability, supplies 24V loop power, and reads the current or voltage produced by the pressure transducers. The 761 is a state of the art automated pressure calibrator which brings automated pressure calibration to the field.

Features

Specifications

Pressure Range

Ordering Info

Video Demo

Pressure Range

Pressure generated by built-in pump and controlled automatically from 90% vacuum to 600 psi (40 bar)

Pressure measured with external pressure modules (160 series) to 10,000 psi (700 bar)
Accuracy (Fully temperature compensated) 0.02%FS

Control Stability
<0.005%FS

Contamination prevention system
Built-in filter and liquid trap with venting system prevent contamination of the calibrator
Solid particles can be blocked by built-in filter
A small amount of Liquid can be collected by the built-in liquid trap
Both solid particles and liquid can be blown out through the venting system

Automation and Test Program
Fully Automated pressure calibration
Task preset and auto run
Auto step

Easy to Use
User friendly interface
Intuitive icon driven menu structure

Sourcing and Measuring electrical signals
Measure mA or V with 0.01% RD + 0.005%FS accuracy
Source/sink 0 to 22mA current
24 VDC loop power supplied to pressure transmitter during test

Automated switch test

Misuse Protection
Up to 30V misuse protection on any two sockets

Display
7" LCD color screen (800X480)

Documenting and data logging
Task management capability
Internal memory stores 200 tasks
Download tasks and upload results

HART Communication capability
Support HART instrumentation

Rechargeable battery:
Rechargeable battery with up to 8 hours operation between charges

Leak testing:
Apply leak test to an external pressure system to determine the magnitude of pressure variations due to leaks

Pipeline Protection:

Special design the pipeline layout to avoid possible blockage and leakage

Portable:
Only 12.4 lb

Multi Lingual Interface
English, German, French, Italian, Spanish, Portuguese, Simplified Chinese (Traditional Chinese, Japanese and Russian are available per request)

NIST Traceable:
NIST traceable calibration with data (included)

Control Stability
<0.005%FS;

Pressure Connections
G1/8 Female on calibrator Two 1/4NPT(or 1/2NPT, 1/4BSP, M20×1.5) female hand-tight connectors on the external pressure manifold (included)

External Pressure Module Connection

External pressure module connector

Electrical Connection
0.156 inch (Ø4mm) banana sockets

Documenting and data logging
Task management capability
Internal memory stores 200 tasks
Download tasks and upload results

Display

7" LCD color screen (800×480)
Display rate: 5 readings per second

Pressure Units
Pa, kPa, MPa, psi, bar, mbar, inH2O 4°C, mmH2O 4°C, inH2O 20°C, mmH2O 20°C, inHg 0°C, mmHg 0°C, kgf/cm2

Power

Battery: Rechargeable Li-ion Polymer battery (included)
Li-Battery working time: ~8 hours
Recharge time: ~3 hours
External Power: 110/220V Power adapter (DC 27 V) (Included)

Environmental Specification
Operating temperature: 32°F to 122°F (0°C to 50°C)
Compensated Temperature: 32°F to 122°F (0°C to 50°C)
Storage temperature: -20°C to 60°C
Humidity: <90%, non-condensing

European Compliance CE Marked

Communication
RS232 (DB9/F, environmentally sealed)
Baud rate: 2400, 4800, 9600, 19200, 38400, 57600, 115200
Data length: 7 Bits, 8 Bits
Stop bit: 1 Bit, 2 Bits

Address: from 1 to 121

Dimension 296mm X186mm X180mm

Weight 12.4 lb (5.6 kg)

Warranty 18 months

Pressure Range

Type	Model	Pressure Range	Pressure Module 1		Pressure Module 2
Type	Model	Pressure Range	Range	Accuracy	Range	Accuracy
Gauge/ Absolute Pressure	ADT761-LA	-0.95 to 7 bar (-13.5 to 100 psi)	-0.95 to 2.5 bar (-13.5 to 35 psi)	0.02%FS	0.95 to 7 bar (-13.5 to 100 psi)	0.02%FS
	ADT761-LA	0.05 to 8 bar.a (1.2 to 115 psi.a)	0.05 to 3.5 bar.a (1.2 to 50 psi.a)	0.03%FS	0.05 to 8 bar.a (1.2 to 115 psi.a)	0.025%FS
	ADT761-MA	-0.90 to 25 bar (-13 to 375 psi)	-0.9 to 2.5 bar (-13 to 35 psi)	0.02%FS	-.09 to 25 bar (-13 to 375 psi)	0.02%FS
	ADT761-MA	0.01 to 26 bar.a (1.7 to 390 psi.a)	0.1 to 3.5 bar.a (1.7 to 50 psi.a)	0.03%FS	0.1 to 26 bar.a (1.7 to 390 psi.a)	0.025%FS
	ADT761-HA	-0.90 to 40 bar (-13 to 600 psi)	-0.9 to 2.5 bar (-13 to 35 psi)	0.02%FS	-0.9 to 40 bar (-13 to 600 psi)	0.02%FS
	ADT761-HA	0.01 to 41 bar.a (1.7 to 615 psi.a)	0.1 to 3.5 bar (1.7 to 50 psi)	0.03%FS	0.1 to 41 bar.a (1.7 to 615 psi.a)	0.025%FS

* One year accuracy (including yearly stability) except ADT761-LLP which is 0.05%FS calibration accuracy and 0.05%FS yearly stability.

* * Additel ADT761 calibrators support ADT160 series intelligent digital pressure modules that are available for gauge, vacuum and absolute pressure from -15 psi to 10,000 psi (-1 bar to 700 bar). Accuracy from 0.025%FS includes operation over 14°F to 122°F (-10°C to 50°C), one year stability and calibration uncertainty.

Electrical Measurement and Source Accuracy

	Range	Resolution	Accuracy
Voltage Measurement	±30.0000v	0.1mV	±[0.01%RD + 0.005%FS]
Current Measurement	±30.0000v	0.1UA	±[0.01%RD + 0.005%FS]
Current Source	0.000 to 22.000mA	1uA	±[0.02%RD + 0.005%FS]
On-Off Measurement	if the switch has detective voltage, the range is from 3V to 24V
DC 24v ouput	24V ± 0.5V, max: 50mA

Additel ADT761 Ordering Guide

ACCESSORIES [included]

Code	Description	Qty
ADT106	External Pressure Manifold [except ADT761-LLP]	1 pc
9618	110V / 220V external power adapter	1 pc
9722	Chargeable Li-ion battery	1 pc
9022	Test leads for calibrator	1 sets
9020	Short circuit cable	1 set
9907	Carry case for ADT761 calibrator and accessories	1 pc
9060	Pressure module connection cable	1 pc
	O-rings [except ADT761-LLP]	20 pcs
	Manual	1 pc
	Tools	1 set
	Hose	2 pc
	NIST traceable Calibration Certificate	1 pc

ACCESSORIES [optional]

Code	Description
ADT100-761-4N	Hose test kit, 5 feet flexible hose, 04mm tube to 1/4NPT hand-tight quick connector
ADT100-761-4B	Hose test kit, 5 feet flexible hose, 04mm tube to 1/4BSP hand-tight quick connector
ADT106-N	External Pressure Manifold [with two 1/4NPT hand-tight quick connectors]
ADT106-B	External Pressure Manifold [with two 1/4BSP hand-tight quick connectors]
ADT106-M	External Pressure Manifold [with two M20X1.5 hand-tight quick connectors]
ADT160	Pressure modules [please check Additel AST160 datasheet]
9060	Pressure module connection cable

Additel ADT761-BP Automated Pressure Calibrators

Additel ADT761 Pressure Calibrator

Fully automated pressure calibrator with built-in pressure generator / controller from 100hPa to 1200hPa
0.01%FS accuracy
Built-in filter and liquid trap with venting system prevents contamination of the calibrator
Portable (12.4 lb)

The 761-BP is specially designed for low pressure calibration . With a quartz pressure sensor , the accuracy of 761-BP can achieve 0.01%FS accuracy .

In addition to the pressure generation, control, and measurement capabilities, the 761 also features HART communication capability, supplies 24V loop power, and reads the current or voltage produced by the pressure transducers. The 761 is a state of the art automated pressure calibrator which brings automated pressure calibration to the field.

Features

Specifications

Pressure Range

Ordering Info

Video Demo

Pressure Range

Pressure generated by built-in pump and controlled automatically from 90% vacuum to 600 psi (40 bar)

Pressure measured with external pressure modules (160 series) to 10,000 psi (700 bar)
Accuracy (Fully temperature compensated) 0.01%FS(ADT761-BP)

Control Stability
<0.005%FS

Contamination prevention system

Built-in filter and liquid trap with venting system prevent contamination of the calibrator
Solid particles can be blocked by built-in filter
A small amount of Liquid can be collected by the built-in liquid trap
Both solid particles and liquid can be blown out through the venting system

Automation and Test Program

Fully Automated pressure calibration
Task preset and auto run
Auto step

Easy to Use
User friendly interface
Intuitive icon driven menu structure

Sourcing and Measuring electrical signals
Measure mA or V with 0.01% RD + 0.005%FS accuracy
Source/sink 0 to 22mA current
24 VDC loop power supplied to pressure transmitter during test
Automated switch test

Misuse Protection
Up to 30V misuse protection on any two sockets

Display
7" LCD color screen (800X480)

Documenting and data logging
Task management capability
Internal memory stores 200 tasks
Download tasks and upload results

HART Communication capability
Support HART instrumentation

Rechargeable battery:
Rechargeable battery with up to 8 hours operation between charges

Leak testing:
Apply leak test to an external pressure system to determine the magnitude of pressure variations due to leaks

Pipeline Protection:
Special design the pipeline layout to avoid possible blockage and leakage

Portable:
Only 12.4 lb

Multi Lingual Interface
English, German, French, Italian, Spanish, Portuguese, Simplified Chinese (Traditional Chinese, Japanese and Russian are available per request)

NIST Traceable:
NIST traceable calibration with data (included)

Control Stability
<0.005%FS;

Pressure Connections
G1/8 Female on calibrator Two 1/4NPT(or 1/2NPT, 1/4BSP, M20×1.5) female hand-tight connectors on the external pressure manifold (included)

External Pressure Module Connection
External pressure module connector

Electrical Connection
0.156 inch (Ø4mm) banana sockets

Documenting and data logging
Task management capability
Internal memory stores 200 tasks
Download tasks and upload results

Display

7" LCD color screen (800×480)
Display rate: 5 readings per second

Pressure Units
hPa (ADT761-BP)

Power
Battery: Rechargeable Li-ion Polymer battery (included)
Li-Battery working time: ~8 hours
Recharge time: ~3 hours
External Power: 110/220V Power adapter (DC 27 V) (Included)

European Compliance
CE Marked

Communication

RS232 (DB9/F, environmentally sealed)
Baud rate: 2400, 4800, 9600, 19200, 38400, 57600, 115200
Data length: 7 Bits, 8 Bits
Stop bit: 1 Bit, 2 Bits
Address: from 1 to 121

Dimension 11.65" X 7.32" X 7.09"(296mm X186mm X180mm)

Weight 12.4 lb (5.6 kg)

Warranty 18 months

Pressure Range

Type	Model	Pressure Range	Pressure Module 1
			Range	Accuracy
Barometric Pressure	ADT761-BP	100 to 1,200 hPa	100 to 1,200 hPa	0.01%FS

* One year accuracy (including yearly stability) except ADT761-LLP which is 0.05%FS calibration accuracy and 0.05%FS yearly stability.

* * Additel 761 calibrators support 160 series intelligent digital pressure modules that are available for gauge, vacuum and absolute pressure from -15 psi to 10,000 psi (-1 bar to 700 bar). Accuracy from 0.025%FS includes operation over 14°F to 122°F (-10°C to 50°C), one year stability and calibration uncertainty. For detailed specification refer to 160 series pressure modules datasheet.

Electrical Measurement and Source Accuracy

	Range	Resolution	Accuracy
Voltage Measurement	±30.0000v	0.1mV	±[0.01%RD + 0.005%FS]
Current Measurement	±30.0000v	0.1UA	±[0.01%RD + 0.005%FS]
Current Source	0.000 to 22.000mA	1uA	±[0.02%RD + 0.005%FS]
On-Off Measurement	if the switch has detective voltage, the range is from 3V to 24V
DC 24v ouput	24V ± 0.5V, max: 50mA

Additel ADT761 Ordering Guide

ACCESSORIES [included]

Code	Description	Qty
ADT106	External Pressure Manifold [except ADT761-LLP]	1 pc
9618	110V / 220V external power adapter	1 pc
9722	Chargeable Li-ion battery	1 pc
9022	Test leads for calibrator	1 sets
9020	Short circuit cable	1 set
9907	Carry case for ADT761 calibrator and accessories	1 pc
9060	Pressure module connection cable	1 pc
	O-rings [except ADT761-LLP]	20 pcs
	Manual	1 pc
	Tools	1 set
	Hose	2 pc
	NIST traceable Calibration Certificate	1 pc

ACCESSORIES [optional]

Code	Description
ADT100-761-4N	Hose test kit, 5 feet flexible hose, 04mm tube to 1/4NPT hand-tight quick connector
ADT100-761-4B	Hose test kit, 5 feet flexible hose, 04mm tube to 1/4BSP hand-tight quick connector
ADT106-N	External Pressure Manifold [with two 1/4NPT hand-tight quick connectors]
ADT106-B	External Pressure Manifold [with two 1/4BSP hand-tight quick connectors]
ADT106-M	External Pressure Manifold [with two M20X1.5 hand-tight quick connectors]
ADT160	Pressure modules [please check Additel AST160 datasheet]
9060	Pressure module connection cable

ADT223A Documenting Process Calibrator

ADT223A by Additel Calibrator The ADT223A by Additel is a highly integrated multifunction calibrator featuring several patented technologies, the ADT223A is an ultra-compact, rugged, and easy to use hand-held device for sourcing, simulating and measuring pressure, temperature, and electrical signals. Its smartphone-like menu and interface make the operation simpler and easier. With HART communication capability, the 223A is ideal for calibrating, maintaining, and troubleshooting HART instrumentats. Automation and documentation capabilities make the ADT223A a turnkey solution.

Applications

Additel's ADT223A multifunction calibrator is a process tool for measuring, sourcing and simulating mA, mV, V, RTDs, thermocouples, ohms, frequency, pulses and pressure, captures switch values and provides 24 V loop power.

Electrical

Resistance measurement / simulation
Voltage measurement / generation
Current measurement /generation
Frequency measurement / generation
Pulse counting/generation
24 VDC loop supply Switch sensing

Temperature

RTD measurement /simulation
TC measurement /simulation

Features

Electrical Specifications

Specifications

Temperature Specifications

Order Info

Video Demo

Sourcing, simulating and measuring temperature and electrical signals

Sources and measures mV, mA, ohms, RTDs, thermocouples, frequency, and pulses
Simulates and measures 13 thermocouples and 11 RTDs to calibrate transmitters
Measures and sources pressure using 160 series Intelligent Digital Pressure Modules from -15 psi to 10,000 psi (-1 bar to 700 bar)
24V loop power supply
Simultaneous dual reading capability
Automatic switch test
Supports square root transmitter
Pulse frequency output for the calibration of flow totalizer

Easy to use

Smartphone-like menu and interface make the operation simpler and easier
Ultra-compact, size 3.9” x 7.6” x 2.0” (100mm x 192mm x 52mm), and weight 1.6 lb (0.7 kg)
One hand operation

Calibrated cold junction compensation (Patented)

Cold junction equivalent block in the calibrator
A calibrated PRT element with flexible leads is installed in the equivalent block for thermocouple cold junction compensation
This PRT element can be pulled out from the calibrator and re-calibrated and corrected at ice point by users

Built-in temperature readout

CVD coefficients of a calibrated PRT can be input into the calibrator for accurate temperature measurement

Multi lingual interface

English, German, French, Italian, Spanish, Portuguese, Simplified Chinese (Traditional Chinese, Japanese and Russian are available per request)

Documenting and automated procedure capability

Manage the information of the device under test.
Set up automated calibration procedures, and ADT 221A performs the test, calculates the errors, displays and/or stores the results in the memory, and highlights the out-of-tolerance points.
As-found and As-left functions allow recording and documenting results for quality control.
Download tasks and upload the results.
Snapshots allow you to capture and save work.

Build-in unit conversion tool

Build-in converters for pressure units, temperature units, temperature vs. resistance (RTDs), and temperature vs millivolt (thermocouples)

Display 3.5 inch TFT color screen

Rugged

Rugged design for harsh environments.
Passed a 1-meter drop test.
Three year warranty for the 223A, and one year for the battery pack

Hart Communication capability Support HART® instrumentation

Misuse protection

Up to 30V voltage on any two sockets and up to 1A current on current sockets will not damage the calibrator.
The calibrator will return to normal condition as soon as the voltage or current is removed.

Rechargeable battery

Rechargeable Li-ion battery for 15 hours uninterrupted use.
Battery life will be reduced when 24V is applied.
The rechargeable battery is replaceable.

NSIT Traceable Calibration with Data

Warranty 3 years

Electrical Measure Specifications

Measurement Accuracy
			Range	Resolution	Accuracy
Voltage DC			±75.0000 mV ±30.0000 V	0.11µV 0.1mV	0.01%RD + 3.75 μV 0.01%RD + 1.5 mV
Current DC			±30.0000 mA	0.1µA	0.01%RD + 1.5 μA
Resistance	Two-wire		0 to 400.000 Ω	1mΩ	0.02%RD + 0.02 Ω
	Three-wire		0 to 400.000 Ω	1mΩ	0.02%RD + 0.02 Ω
	Four-wire		0 to 400.000 Ω	1mΩ	0.01%RD + 0.02 Ω
	Two-wire		0 to 4000.000 Ω	10mΩ	0.02%RD + 0.2 Ω
	Three-wire		0 to 4000.000 Ω	10mΩ	0.02%RD + 0.2 Ω
	Four-wire		0 to 4000.000 Ω	10mΩ	0.01%RD + 0.2 Ω
Frequency			1 to 50000.0 Hz	0.1Hz	0.005%RD + 1 Hz
Pulse			0 to 999999	1	N/A
Limit Switch			If the switch has detective voltage, its range is +3V to +24V
Source Accuracy
Voltage DC		-10.000 to 75.000mV 0 to 12.0000 V		1μV 0.1mV	0.02%RD + 4.25 μV 0.02%RD + 0.6 mV
Current DC		0 to 22.000 mA		1µA	0.02%RD + 1.1 μA
Resistance		1 to 400.00 Ω 1 to 4000.0 Ω		10mΩ 100mΩ	0.02%RD + 0.02 Ω 0.03%RD + 0.4 Ω
Frequency		0 to 50000.0 Hz		0.1Hz	0.005%RD + 1 Hz
Pulse		0 to 999999		1	N/A
DC24V		N/A		N/A	0.5V

Evnironmental Specifications
Operating temperature	-10ºC to 50ºC
Storage temperature	-20ºC to 60ºC
Humidity	<90%, non-condensing
Safety Specifications
European compliance	CE Mark
Mechanical Specifications
Display	3.5 inch TFT colour screen
Electrical connection	φ4mm sockets and flat mini-jack thermocouple socket
RS232 interface	standard RS232-DB9 socket
Size	100 x 192 x 52mm
Weight	0.7kg
Power supply	Polymer Li-ion rechargeable battery, or 10V DC adaptor
Battery	Rechargeable Li-ion battery (included)
Battery life	15 hours uniterrupted use Battery life will be reduced when 24V is applied
Battery charge	110V/220V external power adaptor (included)

Pressure Specification

The 160 series Intelligent Digital Pressure Modules are available for gauge, vacuum and absolute pressure from -15 psi to 10,000 psi (-1 bar to 700 bar).

Accuracy from 0.025%FS includes operation over -10°C to 50°C
One year stability and calibration uncertainty

For detailed specificaitons refer to the Pressure Modules datasheet

Temperature Specifications

Thermocouple Measurement and Source accuracy
Measure and Simulate	Standard		Temperature Range (°C)				Accuracy (°C)
							Measure		Source
S	IEC 584		-50 to 1768		-50 to 400		1.0		1.1
					400 to 1000		0.6		0.6
					1000 to1768		0.7		0.8
R	IEC 584		-50 to 1768		-50 to 200		1.4		1.4
					200 to 500		0.6		0.6
					500 to 1768		0.6		0.7
B	IEC 584		0 to 1820		50 to 450		3.8		3.8
					450 to 800		0.9		0.9
					800 to 1820		0.6		0.7
K	IEC 584		-270 to 1372		-250 to -200		1.0		1.1
					-200 to -100		0.4		0.5
					-100 to 600		0.3		0.3
					600 to 1372		0.4		0.5
N	IEC 584		-270 to 1300		-250 to -200		1.5		1.6
					-200 to -100		0.5		0.6
					-100 to 1300		0.4		0.5
E	IEC 584		-270 to 1000		-250 to -200		0.6		0.7
					-200 to -100		0.3		0.3
					-100 to 0		0.2		0.2
					0 to 700		0.2		0.3
					700 to 1000		0.2		0.4
J	IEC 584		-270 to 1200		-210 to -100		0.3		0.3
					-100 to 1200		0.3		0.4
T	IEC 584		-270 to 400		-250 to -200		0.8		0.9
					-200 to 0		0.4		0.4
					0 to 400		0.2		0.2
C	ASTM E988		0 to 2315		0 to 1000		0.5		0.5
					1000 to 1800		0.7		0.9
					1800 to 2315		1.0		1.4
D	ASTM E988		0 to 2320		0 to 100		0.5		0.5
					100 to 1100		0.4		0.5
					1100 to 2000		0.6		0.9
					2000 to 2320		0.9		1.3
G	ASTM E1751		0 to 2315		0 to 200		2.4		2.4
					200 to 400		0.5		0.5
					400 to 1400		0.4		0.5
					1400 to 2315		0.7		1.0
L	DIN43710		-200 to 900		-200 to -100		0.2		0.3
					-100 to 400		0.2		0.2
					400 to 900		0.2		0.3
U	DIN43710		-200 to 600		-200 to 0		0.4		0.4
					0 to 600		0.2		0.3
RTD Measurement and Source accuracy
Measure and Simulate	Standard	Temperature Range (°C)				Accuracy (°C)
						Measure (2W/3W)		Measure (4W)		Source
Pt10(385)	IEC 751	-200 to 850		-100 to 200		0.65		0.60		0.65
				200 to 600		0.82		0.72		0.82
				600 to 850		0.96		0.82		0.96
PT100 (385)	IEC 751	-200 to 850		-100 to 200		0.15		0.1		0.15
				200 to 600		0.26		0.16		0.26
				600 to 850		0.34		0.20		0.34
Pt100 (3916)	IEC 751	-200 to 850		-100 to 200		0.15		0.1		0.15
				200 to 600		0.26		0.16		0.26
				600 to 850		0.33		0.20		0.33
Pt200(385)	IEC 751	-200 to 850		-100 to 200		0.37		0.32		0.69
				200 to 600		0.51		0.41		0.92
				600 to 850		0.61		0.48		1.08
Pt500(385)	IEC 751	-200 to 850		-100 to 200		0.20		0.16		0.36
				200 to 600		0.32		0.22		0.54
				600 to 850		0.40		0.27		0.67
Pt1000 (385)	IEC 751	-200 to 850		-100 to 200		0.1		0.05		0.26
				200 to 600		0.2		0.10		0.42
				600 to 850		0.27		0.14		0.54
Cu100(428)	GOST6651-94	-50 to 150		-50 to150		0.12		0.09		0.12
Cu50(428)	GOST6651-94	-50 to 150		-50 to 150		0.17		0.13		0.17
Cu10(427)	Minco Application Aid #18	-100 to 260		-100 to 260		0.61		0.56		0.61
Ni120(672)	Edison curve #7	-100 to 260		-100 to 260		0.07		0.05		0.07
Ni100(618)	DIN 43760	-100 to 260		-100 to 260		0.08		0.06		0.08

Model Number: ADT223A

Accessories (included)

110V/220V external power adapter	1 pc
Chargeable Li-ion battery	1 pc
Test leads	2 sets (4 pcs)
Short circuit cable	1 sets (2 pcs)
Manual	1 pc
NIST traceable calibration certificate	1 pc

Optional Accessories

Model number	Description
ADT160A	Intelligent Digital Pressure Modules
9060	Pressure module connection cable
9050	USB to RS232 (DB-9 Male) Adapter
9080	Cold Junction compensation kits (including TC plug, compensation cable, S,R,B,K,J,T,E,N)
9712	Spare chargeable Li-ion battery for multifunction calibrator
9816	110V/220V external power adapter for multifunction calibrator
9906	Carrying case for multifunction calibrator
9510	Additel/Cal Task management software for multifunction calibrator

ADT760 Handheld Pressure Calibrators

The Additel ADT760 series of automated handheld pressure calibrators fits perfectly in the palm of your hand taking portable pressure calibration to new levels.

The Additel 760 series Automatic Handheld Pressure Calibrator takes portable pressure calibration to new levels. Weighing less than 4 lbs (1.8 kg), the ADT760’s innovative design contains a built-in pump, precision pressure sensor, internal controller and a large touch-screen color display. Generating pressure is as simple as keying in the desired pressure and the ADT760 will do the rest!

Each unit has four channels: one internal pressure channel for source and measure pressures, two external pressure measurement channels, and one electronic measure and source channel. This series of calibrator has three standard models with the option of adding HART communications, documentation and data logging.

Documenting Process Functionality - each model of the Additel 760 series has an option incorporating documentation and communication functions turning your 760 into a multifunction documenting process calibrator. This feature provides HART communication, task documentation and data logging.

AST760 Additel Handheld Pressure Calibrator

Fully automatic calibrator with built-in pump and controller
Switchable internal pressure modules for expandable ranges
Accuracy (1 year) of 0.02%FS
External pressure modules available (measure only)
Less than 4 lbs (1.8 kg) for handheld operatio
Source pressure, measure pressure and electrica
4 channels
Optional HART communications
Optional data logging and task documenting
USB, Wi-Fi, and Bluetooth communications

Models

ADT760-LLP Differential/Gauge Pressure

ADT760-D Differential/Gauge Pressure

ADT760-MA Gauge/Absolute Pressure

Model Overview

Electrical Specifications

Internal Module Specificaitons

Applications

ADT760-LLP

The 760-LLP has been designed for low pressure calibration and comes with a built-in pressure module to ±30 inH2O (±75 mbar) and provides an accuracy to 0.05%FS.

If you need to go lower in pressure, you can purchase additional internal pressure modules (ADT155 series), which for the 760-LLP provide a variety of ranges down to ±0.25 inH2O (±0.62 mbar). The accuracy of 0.05%FS and control stability 0.005%FS is based on the internal module’s span. Measurements can be made in gauge or differential mode.

ADT760-D

The 760-D will give you you differential and gauge pressure but at a higher pressure range than the ADT760-LLP.

Covering the range of -12.5 to 35 psi (-0.86 to 2.5 bar) and with an accuracy of 0.02%FS, the ADT760-D is an ideal solution to cover very common gauge and differential pressure measurements. The 760-D by Additel comes with an internal module covering its full range, but lower pressure modules down to ±10 inH2O differential can be purchased to improve accuracy at lower pressures.

ADT760-MA

The 760-MA generates and controls pressure from vacuum pressures up to 300 psig (20 bar.g) with an accuracy of 0.02%FS.

Coming equipped with a built-in barometric reference, each unit can switch between gauge and absolute pressure types. A variety of internal sensors are available which offer lower pressure ranges for improved performance.

{2jtoolbox_content tabs id:5 title: ADT760 series Features}

Channels

Four total: one electrical, one internal pressure, two external pressure (measure only)

Enlcosure IP Rating

IP54 water and dust proof

Battery & Power

Rechargeable Li-ion battery, typically 10 hours of operation, recharges in less than 4 hours

External Power: 110/220 V poer adapter 10 V

Display

Colour 800 x 480 TFT 5 inch touch screen

Communications

USB, WiFi, Bluetooth

HART - optional ADT760-X-DL model

Weight

1.8kg

Size

23.5 x 11 x 7 cm

Certificaiton

NIST traceable certificate with data included

Data Logging

Optional (ADT760-X-DL meodel) up to 1,000,000 readings (date and time stamped)

Task Documentation

Optional (ADT760-X-DL meodel) up to 250 tasks

Automation Functions

Switch test, auto step, leak test

Misuse Protection

Up to 30V on any two sockets

Multi Lingual Interface

English, German, French, Italian, Spanish, Portuguese, Chinese, Japanese, Russian

Pump Life

> 500,00 cycles

Environment Specificaitons

Operation: 0°c to 50°c / 0-90% RH, less than 3,000 metres

Compensated temperature: 0°c to 50°c

Storage temperature: -00°c to 70°c

Vibration and Shock

Vibration: 4g (20 to 2,000 Hz)

Shock: 8g, 1 metre drop test

Warranty

1 year

	ADT760-LLP	ADT760-D	ADT-70-MA
Max Pressure Range	+30 inH20 (75 mbar)	-12.5 to 35 psi (-0.86 to 2.5 bar)	-12.5 to 300 psig (-0.86 to 20 bar.g)
Accuracy	0.05%FS^[1]	0.02%FS^[1]	0.02%FS^[1][3]
Stability	<0.005%FS^[2]	<0.005%FS^[2]	<0.005%FS^[2]
Pressure Type	Differential, Gauge	Differential, Gauge
Over Range Indication	120%	120%	120%
Resolution	6 digits	6 digits	6 digits
Barometric Accuracy	-	-	60 Pa^[4]
Connection	Barb Fitting	Barb Fitting	G 1/8 BSPF
Pressure Output Rate	<30 seconds (30 in H20 / 100ml)	<10 Seconds ( 35 psi / 5 ml )	<90 seconds (300 psi / 5ml)
Measurement Units	Pa, hPa, kPa, mPa, bar, mbar, psi, mmHg@0°c, cmHg@0°c, mHg@0°c, inHg@0°c, inH2O@0°c, mmH2O@0°c, cmH2O@0°c, mH2O@0°c, mmH2O@0°c, cmH2O@0°c, mH2O@0°c, inH2O@0°c, kg/m2, torr, lb/ft2, tsi, custom	Pa, hPa, kPa, mPa, bar, mbar, psi, mmHg@0°C, cmHg@0°C, mHg@0°C, inHg@0°C, inH2O@4°C, mmH2O@4°C, cmH2O@4°C, mH2O@4°C, mH2O@20°C, cmH2O@20°C, mH2O@20°C, inH2O@20°C, kg/m2, mtorr, torr, lb/ft2, tsi, custom	Pa, hPa, kPa, mPa, bar, mbar, psi, mmHg@0°C, cmHg@0°C, mHg@0°C, inHg@0°C, inH2O@4°C, mmH2O@4°C, cmH2O@4°C, mH2O@4°C, mH2O@20°C, cmH2O@20°C, mH2O@20°C, inH2O@20°C, kg/m2, mtorr, torr, lb/ft2, tsi, custom

^[1] FS specification applies to the span of the module range.

^[2] Stability based on FS of the internal pressure module. Stability is 0.005%FS or 0.05 pa whichever is greater. Internal module is switchable.

^[3] Specification based on gauge measurement. An additional 60 pa uncertainty will need to be included when measuring in absolute mode.

^[4] 60 Pa uncertainty (k=2) includes calibration uncertainty, linearity and long term stability (<30 Pa per year). Barometer range of 60 to 110 kPa.

Specification	Range	Resolution	Accuracy	Note
mA Measure	+30 mA	0.0001 mA	0.01%RD+0.005%FS	Impedence <10Ω
V Measure	+30 mA	0.0001 V	0.01%RD+0.005%FS	Impedence <10MΩ
mA Source	24 mA	0.001 mA	0.01%RD+0.005%FS	20 mA @ 1K
Loop Power Source	25 V	N/A	+1 v	100 mA (Max Loading)
Pressure Switch	Open, close. Support for mechanical switches and NPN/PNP digital switches
Temperature Compensation	5°c to 35°c
Temperature Coefficient	<+(0.001%RD + 0.001%FS) / °c outside of 5°c to 35°c

Internal Modules Specifications and Compatibility for ADT760-LLP

Module	Module Range		Media	Accuracy (%FS)^[1]	Burst Pressure
Module	inH2O	mbar	Media	Accuracy (%FS)^[1]	Burst Pressure
DP025	+0.25	+0.62	G	0.2^[2]	100x
DP050	+0.5	+1.25	G	0.1^[2]	100x
DP1	+1	+2.5	G	0.05^[2]	100x
DP2	+2	+5	G	0.05^[2]	100x
DP5	+5	+10	G	0.05^[2]	50x
DP10	+10	+25	G	0.05^[2]	20x
DP20	+20	+50	G	0.05	20x
DP30	+30	+75	G	0.05	20x

^[1] FS specification applies to the span of the module range. Accuracy includes one-year stability, except for DP025 to DP10 modules.

^[2] 0.05%FS accuracy (includes 6 month stability). One year accuracy is 0.05%FS calibration accuracy combined with 0.05%FS one year stability.

Internal Modules Specifications and Compatibility for ADT760-LLP

Module	Module Range		Media	Accuracy (%FS)^[1]	Burst Pressure
Module	inH2O	mbar	Media	Accuracy (%FS)^[1]	Burst Pressure
DP10	+10	+0.62	G	0.05^[2]	20x
DP20	+20	+1.25	G	0.05	20x
DP30	+30	+2.5	G	0.05	20x
DP50	+50	+5	G	0.05	3x
DP150	+150	+10	G	0.02	3x
DP300	+300	+25	G	0.02	3x
DP400	-350 to 400 (-12.5 to 15 psi)	-860 to 1K (-0.86 to 1 bar)	G	0.02	3x
DP800	-350 to 800 (-12.5 to 30 psi)	-860 to 2K (-0.86 to 2 bar)	G	0.02	3x
DP1K	-350 to 1K (-12.5 to 35 psi)	-860 to 2.5K (-0.86 to 2.5 bar)	G	0.02	3x
Gauge Pressure	psi	bar
CP10	+10	+0.7	G	0.02^[3]	3x
CP15	+15	+1	G	0.02^[3]	3x
CP30	-12.5 to 30	-0.86 to 2	G	0.02^[3]	3x
CP35	-12.5 to 35	-0.86 to 2.5	G	0.02^[3]	3x

^[1] FS specification applies to the span of the module range. Accuracy includes one-year stability, except for DP025 to DP10 modules.

^[2] 0.05%FS accuracy (includes 6 month stability). One year accuracy is 0.05%FS calibration accuracy combined with 0.05%FS one year stability.

^[3] Speficication based on gauge measurement. An additional 40 pa uncertainty will need to be included when measuring in absolute mode. Applicable only for use with the ADT760-MA

Internal Modules Specifications and Compatibility for ADT760-MA

Module	Module Range		Media	Accuracy (%FS)^[1]	Burst Pressure
Module	inH2O	mbar	Media	Accuracy (%FS)^[1]	Burst Pressure
CP10	+0.25	+0.7	G	0.2^[3]	3x
CP15	+0.5	+1	G	0.2^[3]	3x
CP30	-12.5 to 30	-0.86 to 2	G	0.2^[3]	3x
CP35	-12.5 to 35	-0.86 to 2.5	G	0.2^[3]	3x
CP50	-12.5 to 35	-0.86 to 3.5	G	0.2^[3]	3x
CP100	-12.5 to 100	-0.86 to 7	G	0.2^[3]	3x
CP150	-12.5 to 150	-0.86 to 10	G	0.2^[3]	3x
CP200	-12.5 to 200	-0.86 to 14	G	0.2^[3]	3x
CP300	-12.5 to 300	-0.86 to 20	G	0.2^[3]	3x

^[1] FS specification applies to the span of the module range. Accuracy includes one-year stability, except for DP025 to DP10 modules.

^[3] Speficication based on gauge measurement. An additional 40 pa uncertainty will need to be included when measuring in absolute mode. Applicable only for use with the ADT760-MA

AST760 Handheld Pressure Calibrator

Application	ADT760
Application	MA	D	LLP
Differntial gauge calibration			•
Low pressure calibration		•	•
Differntial transmitter calibration			•
Differential switch calibration			•
HART-smart transmitter calibration ( -DL version only)	•	•	•
Pressure monitoring & data logging ( - DL version only)	•	•	•
Gauge calibration for differntial & gauge type pressures	•	•
Transmitter calibration for absolute & gauge type pressures	•	•
Switch calibration for absolute & gauge type pressures	•	•

ADT222A Multifunction Process Calibrator

ADT22A by Additel Multifunction Process Calibrators The ADT222A by Additel is a highly integrated multifunction calibrator featuring several patented technologies, the ADT222A is an ultra-compact, rugged, and easy to use hand-held device for sourcing, simulating and measuring pressure, temperature, and electrical signals. Its smartphone-like menu and interface make the operation simpler and easier. Additel's ADT222A is ideal for calibrating, maintaining, and troubleshooting process instruments. Automation and documentation capabilities make the ADT222A a turnkey solution.

Applications

Additel's ADT222A multifunction calibrator is a process tool for measuring, sourcing and simulating mA, mV, V, RTDs, thermocouples, ohms, frequency, pulses and pressure, captures switch values and provides 24 V loop power.

Electrical

Resistance measurement / simulation
Voltage measurement / generation
Current measurement /generation
Frequency measurement / generation
Pulse counting/generation
24 VDC loop supply Switch sensing
Switch sensing

Temperature

RTD measurement /simulation
TC measurement /simulation

Pressure

Gauge pressure measurement
Absolute pressure measurement

Features

Electrical Specifications

Specifications

Temperature Specifications

Order Info

Video Demo

Sourcing, simulating and measuring temperature and electrical signals

Sources and measures mV, mA, ohms, RTDs, thermocouples, frequency, and pulses
Simulates and measures 13 thermocouples and 11 RTDs to calibrate transmitters
Measures and sources pressure using 160 series Intelligent Digital Pressure Modules from -15 psi to 10,000 psi (-1 bar to 700 bar)
24V loop power supply
Simultaneous dual reading capability
Automatic switch test
Supports square root transmitter
Pulse frequency output for the calibration of flow totalizer

Easy to use

Smartphone-like menu and interface make the operation simpler and easier
Ultra-compact, size 3.9” x 7.6” x 2.0” (100mm x 192mm x 52mm), and weight 1.6 lb (0.7 kg)
One hand operation

Calibrated cold junction compensation (Patented)

Cold junction equivalent block in the calibrator
A calibrated PRT element with flexible leads is installed in the equivalent block for thermocouple cold junction compensation
This PRT element can be pulled out from the calibrator and re-calibrated and corrected at ice point by users

Built-in temperature readout

CVD coefficients of a calibrated PRT can be input into the calibrator for accurate temperature measurement

Multi lingual interface

English, German, French, Italian, Spanish, Portuguese, Simplified Chinese (Traditional Chinese, Japanese and Russian are available per request)

Documenting and automated procedure capability

Manage the information of the device under test.
Set up automated calibration procedures, and ADT 221A performs the test, calculates the errors, displays and/or stores the results in the memory, and highlights the out-of-tolerance points.
As-found and As-left functions allow recording and documenting results for quality control.
Download tasks and upload the results.
Snapshots allow you to capture and save work.

Build-in unit conversion tool

Build-in converters for pressure units, temperature units, temperature vs. resistance (RTDs), and temperature vs millivolt (thermocouples)

Display 3.5 inch TFT color screen

Rugged

Rugged design for harsh environments.
Passed a 1-meter drop test.
Three year warranty for the 222A, and one year for the battery pack

Misuse protection

Up to 30V voltage on any two sockets and up to 1A current on current sockets will not damage the calibrator. The calibrator will return to normal condition as soon as the voltage or current is removed.

Rechargeable battery

Rechargeable Li-ion battery for 15 hours uninterrupted use.
Battery life will be reduced when 24V is applied.
The rechargeable battery is replaceable.

NSIT Traceable Calibration with Data

Warranty 1 year

Electrical Measure Specifications

Measurement Accuracy
			Range	Resolution	Accuracy
Voltage DC			±75.0000 mV ±30.0000 V	0.11µV 0.1mV	0.01%RD + 3.75 μV 0.01%RD + 1.5 mV
Current DC			±30.0000 mA	0.1µA	0.01%RD + 1.5 μA
Resistance	Two-wire		0 to 400.000 Ω	1mΩ	0.02%RD + 0.02 Ω
	Three-wire		0 to 400.000 Ω	1mΩ	0.02%RD + 0.02 Ω
	Four-wire		0 to 400.000 Ω	1mΩ	0.01%RD + 0.02 Ω
	Two-wire		0 to 4000.000 Ω	10mΩ	0.02%RD + 0.2 Ω
	Three-wire		0 to 4000.000 Ω	10mΩ	0.02%RD + 0.2 Ω
	Four-wire		0 to 4000.000 Ω	10mΩ	0.01%RD + 0.2 Ω
Frequency			1 to 50000.0 Hz	0.1Hz	0.005%RD + 1 Hz
Pulse			0 to 999999	1	N/A
Limit Switch			If the switch has detective voltage, its range is +3V to +24V
Source Accuracy
Voltage DC		-10.000 to 75.000mV 0 to 12.0000 V		1μV 0.1mV	0.02%RD + 4.25 μV 0.02%RD + 0.6 mV
Current DC		0 to 22.000 mA		1µA	0.02%RD + 1.1 μA
Resistance		1 to 400.00 Ω 1 to 4000.0 Ω		10mΩ 100mΩ	0.02%RD + 0.02 Ω 0.03%RD + 0.4 Ω
Frequency		0 to 50000.0 Hz		0.1Hz	0.005%RD + 1 Hz
Pulse		0 to 999999		1	N/A
DC24V		N/A		N/A	0.5V

Evnironmental Specifications
Operating temperature	-10ºC to 50ºC
Storage temperature	-20ºC to 60ºC
Humidity	<90%, non-condensing
Safety Specifications
European compliance	CE Mark
Mechanical Specifications
Display	3.5 inch TFT colour screen
Electrical connection	φ4mm sockets and flat mini-jack thermocouple socket
RS232 interface	standard RS232-DB9 socket
Size	100 x 192 x 52mm
Weight	0.7kg
Power supply	Polymer Li-ion rechargeable battery, or 10V DC adaptor
Battery	Rechargeable Li-ion battery (included)
Battery life	15 hours uniterrupted use Battery life will be reduced when 24V is applied
Battery charge	110V/220V external power adaptor (included)

Pressure Specification

The 160 series Intelligent Digital Pressure Modules are available for gauge, vacuum and absolute pressure from -15 psi to 10,000 psi (-1 bar to 700 bar).

Accuracy from 0.025%FS includes operation over -10°C to 50°C
One year stability and calibration uncertainty

For detailed specificaitons refer to the Pressure Modules datasheet

Temperature Specifications

Thermocouple Measurement and Source accuracy
Measure and Simulate	Standard		Temperature Range (°C)				Accuracy (°C)
							Measure		Source
S	IEC 584		-50 to 1768		-50 to 400		1.0		1.1
					400 to 1000		0.6		0.6
					1000 to1768		0.7		0.8
R	IEC 584		-50 to 1768		-50 to 200		1.4		1.4
					200 to 500		0.6		0.6
					500 to 1768		0.6		0.7
B	IEC 584		0 to 1820		50 to 450		3.8		3.8
					450 to 800		0.9		0.9
					800 to 1820		0.6		0.7
K	IEC 584		-270 to 1372		-250 to -200		1.0		1.1
					-200 to -100		0.4		0.5
					-100 to 600		0.3		0.3
					600 to 1372		0.4		0.5
N	IEC 584		-270 to 1300		-250 to -200		1.5		1.6
					-200 to -100		0.5		0.6
					-100 to 1300		0.4		0.5
E	IEC 584		-270 to 1000		-250 to -200		0.6		0.7
					-200 to -100		0.3		0.3
					-100 to 0		0.2		0.2
					0 to 700		0.2		0.3
					700 to 1000		0.2		0.4
J	IEC 584		-270 to 1200		-210 to -100		0.3		0.3
					-100 to 1200		0.3		0.4
T	IEC 584		-270 to 400		-250 to -200		0.8		0.9
					-200 to 0		0.4		0.4
					0 to 400		0.2		0.2
C	ASTM E988		0 to 2315		0 to 1000		0.5		0.5
					1000 to 1800		0.7		0.9
					1800 to 2315		1.0		1.4
D	ASTM E988		0 to 2320		0 to 100		0.5		0.5
					100 to 1100		0.4		0.5
					1100 to 2000		0.6		0.9
					2000 to 2320		0.9		1.3
G	ASTM E1751		0 to 2315		0 to 200		2.4		2.4
					200 to 400		0.5		0.5
					400 to 1400		0.4		0.5
					1400 to 2315		0.7		1.0
L	DIN43710		-200 to 900		-200 to -100		0.2		0.3
					-100 to 400		0.2		0.2
					400 to 900		0.2		0.3
U	DIN43710		-200 to 600		-200 to 0		0.4		0.4
					0 to 600		0.2		0.3
RTD Measurement and Source accuracy
Measure and Simulate	Standard	Temperature Range (°C)				Accuracy (°C)
						Measure (2W/3W)		Measure (4W)		Source
Pt10(385)	IEC 751	-200 to 850		-100 to 200		0.65		0.60		0.65
				200 to 600		0.82		0.72		0.82
				600 to 850		0.96		0.82		0.96
PT100 (385)	IEC 751	-200 to 850		-100 to 200		0.15		0.1		0.15
				200 to 600		0.26		0.16		0.26
				600 to 850		0.34		0.20		0.34
Pt100 (3916)	IEC 751	-200 to 850		-100 to 200		0.15		0.1		0.15
				200 to 600		0.26		0.16		0.26
				600 to 850		0.33		0.20		0.33
Pt200(385)	IEC 751	-200 to 850		-100 to 200		0.37		0.32		0.69
				200 to 600		0.51		0.41		0.92
				600 to 850		0.61		0.48		1.08
Pt500(385)	IEC 751	-200 to 850		-100 to 200		0.20		0.16		0.36
				200 to 600		0.32		0.22		0.54
				600 to 850		0.40		0.27		0.67
Pt1000 (385)	IEC 751	-200 to 850		-100 to 200		0.1		0.05		0.26
				200 to 600		0.2		0.10		0.42
				600 to 850		0.27		0.14		0.54
Cu100(428)	GOST6651-94	-50 to 150		-50 to150		0.12		0.09		0.12
Cu50(428)	GOST6651-94	-50 to 150		-50 to 150		0.17		0.13		0.17
Cu10(427)	Minco Application Aid #18	-100 to 260		-100 to 260		0.61		0.56		0.61
Ni120(672)	Edison curve #7	-100 to 260		-100 to 260		0.07		0.05		0.07
Ni100(618)	DIN 43760	-100 to 260		-100 to 260		0.08		0.06		0.08

Model Number: ADT222A

Accessories (included)

110V/220V external power adapter	1 pc
Chargeable Li-ion battery	1 pc
Test leads	2 sets (4 pcs)
Short circuit cable	1 sets (2 pcs)
Manual	1 pc
NIST traceable calibration certificate	1 pc

Optional Accessories

Model number	Description
ADT160A	Intelligent Digital Pressure Modules
9060	Pressure module connection cable
9050	USB to RS232 (DB-9 Male) Adapter
9080	Cold Junction compensation kits (including TC plug, compensation cable, S,R,B,K,J,T,E,N)
9712	Spare chargeable Li-ion battery for multifunction calibrator
9816	110V/220V external power adapter for multifunction calibrator
9906	Carrying case for multifunction calibrator
9510	Additel/Cal Task management software for multifunction calibrator

Process Instrumentation - Sales / Installation / Calibration

Calibration & Service

Pressure

Gas Detection

Sales, System Design, Installation & Calibration

Additel, Honeywell Analytics, Intech Instruments, Sentech Corporattion

Gas Detection, Process Control, Pressure Gauges, Temperature Monitoring

Calibration, System Design, Installation, Fault Finding

Additel ADT761-LA/MA/HA Automated Pressure Calibrators

Additel ADT761-BP Automated Pressure Calibrators

ADT223A Documenting Process Calibrator

ADT760 Handheld Pressure Calibrators

ADT760-LLP

ADT760-D

ADT760-MA

Internal Modules Specifications and Compatibility for ADT760-LLP

Internal Modules Specifications and Compatibility for ADT760-LLP

Internal Modules Specifications and Compatibility for ADT760-MA

ADT222A Multifunction Process Calibrator

More Articles ...

We have all your Pressure, Instrumentation and Gas Detection in the one place.

Craig Colhoun

General Manager

Would you like to know how we can help you?